|
"We are
thrilled with the results. By the time the project was finished
we installed wood in the kitchen, breakfast room, dining room,
living room and hallway. Not a day has gone by that we have
regretted the decision to put wood in so much of our home.
Cleaning
is a breeze – just a quick swipe with a dust mop or a broom and
the daily upkeep is done. Once a week they are mopped with a damp mop
and that is the extent of the upkeep.
Thank you so
much for your help with questions along the way. You truly helped make
the job easier."
--Marcia and
Dick Heintz |
"We
looked in at least six different stores on line and off to look
for what we wanted. You were the one that met our budget, had real wood, consistently
responded to my e-mails, and was the most helpful. Thank you for running your
business this way!
And the AWARD for Best Flooring Value, Product, Delivery And Customer
Service goes to ----------
BIWOOD...!!! CONGRATULATIONS!!! and THANK YOU!!!"
--The Moores |
|
"I
wanted to take a moment and tell you how much I sincerely appreciate
your help, reviewing my drawing to insure my calculations were right,
and your calculation including waste was perfect to the last board,
also thank you for answering all my questions. You know the Do it
yourself questions for Dummy's.
Everything turned out great!"
--John L. Smith
"I can't
say that I've ever found more pleasant and helpful people to deal with,
live or on the internet. Their prices and product lines are hard to beat
anywhere I've looked. They put Home Depot and Lowes to shame!"
-- Joseph Miller
|
"I put some
common, and not so common household liquids found in the everyday kitchen
on the samples finish to see how it would hold up. The liquids I used
were things that I thought would damage the finish.:
• I crushed some Blueberries on it to see how they would stain the
surface.
• I put some juice from crushed tomato on it to see if the acid
would take any part of the finish off.
• I poured some rubbing alcohol on the finish to see if it would
come off. As well as nail polish remover.
• I also poured some vinegar, and bleach on the surface of the finish.
I then let
all of the above stay on the finish for about a half hour. After the half
hour passed I wiped the surface clean with a dry cloth and found that
the surface was just as shiny and bright as it was before my test. None
of the things I put on the sample piece of flooring damaged the finish!
After seeing the results of my tests, I'll
be calling you with my order information today for 85 cartons."
--Dave Broadbent,
Philo, CA
|
